Last Modified: 11-29-2007 1.6 A
Service Category: Suspension Section: Tire Pressure Monitoring
Model Year: 2008 Model: Sequoia Doc ID: RM000001PKE004X
Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU

(a) Install the tire pressure warning ECU with the 2 nuts.

Torque: 7.5 N·m (76 kgf·cm, 66 ft·lbf)

(b) Connect the tire pressure warning ECU connector.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

4. INSTALL INSTRUMENT SIDE PANEL RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

5. INSTALL COWL SIDE TRIM BOARD RH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

6. INSTALL FRONT DOOR SCUFF PLATE RH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

7. REGISTRATION TRANSMITTER ID

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: REGISTRATION (2008 Sequoia)

8. INSPECT TIRE PRESSURE WARNING SYSTEM

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: TEST MODE PROCEDURE (2008 Sequoia)

9. INITIALIZE SYSTEM

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: INITIALIZATION (2008 Sequoia)